{"title":"Suspension Control Arm","description":null,"products":[{"product_id":"tick-adjustable-torque-boxes-for-3rd-and-4th-gen-f-body-one-pair","title":"Tick Adjustable Torque Boxes for 3rd and 4th Gen F-body (One Pair) With Heim Joints and Hardware","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNote: This Product is designed to BEST FIT 93-02 Camaro and Firebird. HOWEVER, with only slightly more cutting it will work with 82-92 Camaro and Firebird.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFor years, there have been relocation brackets or even custom control arm brackets with multiple mounting locations available to lower the rear mounting point of the control arm.  The idea is by lowering the mounting point of the control arm on the rear housing, you increase the angle of the control arm, rising from the rear to the front.  This positions the 'instant center' (IC) higher in the chassis.  If the point of IC is higher than the anti-squat line, you get just that, anti-squat, or separation of the suspension during launch.  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThis product makes the front mounting location of the control arm adjustable as well.  On the rear housing, the mounting holes can only go so low, because the bolt holding the control arm to the chassis drops below the level of the rim and gets beside of the tire in an area that is already very limited on clearance.  By raising the mounting location on the front of the control arm, you're achieving the same result as lowering it on the rear housing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eBy adding two holes above the factory bolt location, and two holes below you have a full range of adjustment to get the bar angle where you want it at any ride height!  By using the top hole, you are able to increase the bar angle by 4 degrees compared to the middle or stock location!!  This is especially important for radial tire cars which like to hit the tire hard (lots of anti-squat) but also want a ride height as low as possible.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThese torque boxes come pre-welded, ready for installation.  Made from durable 4130 chromoly.  Very minimal cutting is required and the mounting bolt threads into the box itself, which allows it to simply be welded into the chassis without cutting the inner wall of the stock mounting location at all.  Nord-Lock lock washers are included for proper bolt retention.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDrop down selections allow you to add Military Spec bolts and the required heim joints for the 1\/2\" bolt (3\/4\" thread with 1\/2\" hole).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThis product incorporates the spacers normally found on either side of the heim joint of your aftermarket control arm that was originally intended to fill the width of the stock mounting location.  By designing these boxes in this way, stress on the bolt has been greatly reduced and should eliminate the possibility of bending the mounting bolts.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eThis product will not work with stock control arms, or any aftermarket boxed\/tubular fabricated arm that uses OEM width polyurethane bushings!!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eThis is a weld-in component we recommend professional installation for correct fitment\u003c\/strong\u003e\u003c\/span\u003e \u003c\/p\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e3rd Gen F-Bodies: The Torque box locations on both 82-92 and 93-02 F bodies are similar in shape and the same in physical location, however they are not identical and this is why the 82-92 requires a little more prep work prior to the install of the new Torque Boxes.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e","brand":"Tick Performance","offers":[{"title":"Default Title","offer_id":44523482677542,"sku":"TPFBTB","price":459.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/5697\/5654\/products\/5N7A3694__10876.1671482299.jpg?v=1677541922"},{"product_id":"camaro-front-lower-control-arms-gen6","title":"Camaro Front Lower Control Arms Gen6","description":"\u003cp\u003eCamaro Front Lower Control Arms (FLCA) provide roll center, camber, and track width adjustment for the 2016+ Chevrolet Camaro, and allow for full articulation with the proper ball joint angle. The main arm is slotted to allow the use of pinch bolts, and our rotating clamps on SPL Parts' exclusive Double Adjuster lock down camber and track width settings. No more jam nuts!!  Long gone are the days of fumbling with multiple wrenches to tighten jam nuts in place while trying to keep your bearings oriented correctly.  Using our lower control arm, you can set up your suspension for whatever your needs are. If you have lowered your Camaro, you can use our roll center spacers to get your roll center back where it should be and have the car roll less and take full advantage of that lower center of gravity. If you are looking to show up at the car meet with the most camber, we can do that for you too, allowing up to approximately 4.3* of camber, depending on ride height. And finally, if you are turning laps out at the track, our quick adjustment double adjuster makes making minor camber adjustments a breeze, increasing your grip and reducing tire wear. Our Double Adjuster is machined from 4130 Chromoly, gun drilled to reduce weight, then electroless nickel plated for corrosion resistance. Blue Anodized Titanium hardware shaves even more unsprung weight from the arms without compromising strength.  Stainless Steel spacers are provided to correct roll center for lowered vehicles. The use of FK Rod Ends and High Misalignment Spherical Bearings eliminates the flex and binding found in the OEM control arms, while allowing smooth articulation.  Sold as a pair. Made in the USA!   NOTE: You will have to slightly clearance the bolt hole on the knuckle side to fit the Socket Head Cap Screw we provide. You should still be able to return to stock.   SPL Parts Billet Camaro Lower Control\/Trailing Arms Feature: •    Lightweight 6061-T6 Billet Aluminum and Titanium Hardware •    Electroless nickel plated 4130 Chromoly Double Adjuster for quick adjustment •    Correct ball joint angle for full articulation •    Rotating Clamp design allows for easy access to lock down alignment settings •    Low friction 3 piece Teflon lined FK sphericals and Heim joints\/rod ends •    Multiple size Stainless Steel roll center spacers for precise adjustment   Applications: 2016+ Chevrolet Camaro (6th Generation) 2016-2019 Cadillac CTS\/CTS-V Need a replacement rod end? SPL Parts Rod Ends Installation Instructions: SPL FLCA CAM6 Instructions\u003c\/p\u003e","brand":"SPL Parts","offers":[{"title":"Default Title","offer_id":45706001383718,"sku":"SPL FLCA CAM6","price":799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/5697\/5654\/files\/FLCA-CAM6-W-STUDS-1__99306.1689172757.jpg?v=1690490962"},{"product_id":"1034-2005-2014-ford-mustang-budget-lower-control-arms-rear-boxed","title":"1034 - 2005-2014 Ford Mustang Budget Lower Control Arms, Rear, Boxed","description":"UMI Performance, Inc is proud to introduce our 1034 wallet friendly lower control arm for the Ford S197 chassis. The 1034’s feature the same quality construction as our other products but at a reduced price tag. In the steel industry, square costs less than round so we are passing that savings on to you! Featuring 1” x 2” and a heavy 0.125” wall thickness these new arms can take anything thrown at them. Our tried and true Teflon fortified poly bushings reduce deflection and feature grease channels for a quiet ride. These arms are available in durable red or gloss black powder coat. 100% manufactured, tested and raced out of Philipsburg, PA – USA. Installation: Easy one hour bolt-on installation that requires no drilling or welding and uses OEM hardware.","brand":"UMI Performance","offers":[{"title":"Default Title","offer_id":52905412722982,"sku":"GPHP_1034-B","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/5697\/5654\/files\/1034-B.jpg?v=1774998662"},{"product_id":"boost-your-cars-handling-with-umi-a-arms-for-strength-control-and-style","title":"Boost your car's handling with UMI A-arms for strength, control, and style.","description":"Upgrade your front suspension with UMI’s A-arms to improve performance and appearance. Designed specifically for 1970-1981 GM F-body and 1978-1996 GM B-Body vehicles, these A-arms enhance steering feel and stability at high speeds. They feature caster relocation, chromoly offset cross shafts, and a heavy-duty lower spring bucket, all aimed at optimizing your driving experience. Constructed from 1.500” USA-made DOM steel tubing, these A-arms are built for durability. Premium ball joints ensure reliable performance, while the heavy-duty spring bucket accommodates both factory and aftermarket coil springs, including popular hybrid coils like Viking and QA1. Greaseable polyurethane bushings and bump stops provide a crisp yet comfortable ride, and the double shear swivel sway bar mounts and hardware are compatible with UMI and most factory eyelet style sway bars. Proudly made in the USA, UMI’s A-arms are the ideal choice for enthusiasts seeking superior quality and performance.","brand":"UMI Performance","offers":[{"title":"Default Title","offer_id":52905417179430,"sku":"GPHP_2651-R","price":699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/5697\/5654\/files\/2651-R-1.jpg?v=1774998997"},{"product_id":"upgrade-f-b-body-front-suspension-with-umi-a-arms-for-precision-and-strength","title":"Upgrade F\/B-body front suspension with UMI A-arms for precision and strength.","description":"Upgrade your front suspension with UMI’s high-quality A-arms for improved performance and appearance. Specifically designed for 1970-1981 GM F-body and 1978-1996 GM B-Body vehicles, these A-arms optimize steering feel and stability at high speeds. They feature caster relocation, chromoly offset cross shafts, and a heavy-duty lower spring bucket, enhancing your driving experience by improving straight-line stability and handling. Constructed from 1.500” USA-made DOM steel tubing, these A-arms are durable and reliable. With premium ball joints and Delrin bushings, they reduce friction and enhance steering precision, making them perfect for both daily driving and racing applications. Additionally, the A-arms are compatible with popular hybrid coils like Viking and QA1, providing flexibility in your suspension setup. Proudly made in the USA, UMI’s A-arms deliver superior quality and performance for enthusiasts ready to upgrade their vehicle. Experience the difference in handling and control with UMI’s A-arms.","brand":"UMI Performance","offers":[{"title":"Default Title","offer_id":52905419604262,"sku":"GPHP_2652-R","price":779.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/5697\/5654\/files\/2652-R-1.jpg?v=1774999154"},{"product_id":"3015-1978-1988-gm-g-body-tubular-non-adjustable-lower-control-arms","title":"3015 - 1978-1988 GM G-Body Tubular Non-Adjustable Lower Control Arms","description":"Rear lower control arms are a must improvement  for any General  Motors A-Body vehicle. Our lower control arms our  designed to replace  your weak, rusted, factory-stamped arms, adding  strength, rigidity and  bushing improvement. Built using strong DOM  steel tubing these direct  bolt on replacements help eliminate unwanted  wheel hop while improving  cornering and helping much needed track  consistency. Lower Control arms  feature CNC Machined 0.120\" wall  thickness mild steel tubing, fully TIG  welded construction, greaseable  polyurethane bushings and zerk grease  fittings all combined to make the  best arms on the market!","brand":"UMI Performance","offers":[{"title":"Default Title","offer_id":52905419964710,"sku":"GPHP_3015-B","price":229.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/5697\/5654\/files\/3015ab_LRG.jpg?v=1774999161"},{"product_id":"umi-rear-kit-boosts-traction-stability-and-eliminates-wheel-hop","title":"UMI Rear Kit boosts traction, stability, and eliminates wheel hop.","description":"This rear suspension kit from UMI Performance includes rear trailing arms and rear toe rod arms that help maintain caster and camber settings for the rear tires. Replacing factory stamped rear suspension items also provides improved traction, eliminates wheel hop, and increases rear end stability. The UMI rear suspension kit is fabricated from 1” x 2” rectangular tubing and features CNC machined mounting plates and bushing holders. The entire kit is assembled with low deflection, greaseable, and fluted polyurethane bushings from . This rear suspension kit is a direct bolt-in setup and installation time is less than two hours using basic hand tools.","brand":"UMI Performance","offers":[{"title":"Default Title","offer_id":52905420357926,"sku":"GPHP_251520-R","price":329.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/5697\/5654\/files\/251520a_LRG.jpg?v=1774999168"},{"product_id":"umi-boxed-b-body-control-arms-improve-strength-ride-quality-traction","title":"UMI boxed B-Body control arms improve strength, ride quality \u0026 traction.","description":"Whether your classic Chevrolet B-body is a restoration project, street car or drag car the UMI control arms will be an excellent upgrade. These new manufactured boxed control arms are a direct bolt in designed to replace the factory stamped control arms. Over time factory control arms rust which can weaken them while the factory bushings dry rot, harden and crack decreasing the ride quality and vehicle performance. This new control arm setup from UMI is assembled with high quality greaseable polyurethane bushings which improve ride quality and overall vehicle performance. Polyurethane bushings reduce bushing deflection found with factory rubber bushings, polyurethane bushings can help to reduce body roll and increase traction. The construction of the control arms features 1\/8\" wall thickness USA rectangular tubing with DOM bushing holders and reinforced sway bar holes. UMI’s new boxed control arms feature spring perches and clips to except the factory spring or lowering springs. Designed and manufactured with pride in Philipsburg, PA - USA.","brand":"UMI Performance","offers":[{"title":"Default Title","offer_id":52905423241510,"sku":"GPHP_3655-B","price":379.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/5697\/5654\/files\/3655-1-B-r1.jpg?v=1790224060"},{"product_id":"umi-tubular-rear-control-arms-with-poly-bushings-bolt-on-1-hour-install","title":"UMI tubular rear control arms with poly bushings, bolt-on, 1-hour install.","description":"Rear control arms are an essential suspension upgrade for your GM vehicle. Stock control arms are often subpar, leading to traction loss and poor handling. Our tubular control arms offer improved performance for both weekend cruising and track use. The ® polyurethane bushings included provide better durability and enhanced ride quality, reducing traction loss. These control arms are a direct replacement that minimizes wheel hop, enhances cornering, and improves track consistency. Installation is quick and easy, taking only about an hour and requiring no drilling. Simply use the existing OEM hardware for a seamless upgrade. Trust in our durable construction, built with precision CNC machining and TIG\/MIG welding, and finished with a long-lasting powder coat.","brand":"UMI Performance","offers":[{"title":"Default Title","offer_id":52905423405350,"sku":"GPHP_4016-B","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/5697\/5654\/files\/4016-B.png?v=1774999256"},{"product_id":"umi-gm-rear-control-arms-tubular-poly-bushings-minimizes-wheel-hop","title":"UMI GM rear control arms: tubular, poly bushings, minimizes wheel hop.","description":"Rear control arms are one of the most important suspension  modifications that can be done to your GM vehicle. Stock control arms  are on the borderline of junk, bushing deflection and rusting  weak stamped material add for traction loss and poor handling ability.  Our tubular control arms are designed to give you the best of both  worlds, whether your car is a weekend cruiser or a weekend track addict  we got you covered. The included high quality polyurethane  bushings are an excellent improvement over OEM rubber bushings, while  adding ride improvements they also work excellent to reduce traction  loss. These control arms are a direct bolt-on replacement designed to  minimize wheel hop, improve cornering and help track consistency. Lower  control arms are supplied with sway bar mounting holes designed for  your stock sway bar and most aftermarket bars.  Features - Built using 1.625\" OD x 0.120\" DOM Mild Steel Tubing - CNC Machined for Precision Tolerances and Accuracy - Fully TIG and MIG Welded Construction - On-Car Grease able high quality Bushings with Grease Fittings - Durable Long Lasting Powder Coat finish  Installation: Installs in 2 hours using OEM hardware. All installation instructions included.","brand":"UMI Performance","offers":[{"title":"Default Title","offer_id":52905424159014,"sku":"GPHP_401516-R","price":369.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/5697\/5654\/files\/301516-R_90073784-f2ec-4e52-b419-84ab54a1f60b.jpg?v=1774999303"},{"product_id":"umi-rear-lower-control-arms-for-gm-a-body","title":"UMI rear lower control arms for GM A-Body","description":"Rear lower control arms are a necessary upgrade for any General Motors A-Body vehicle. Our control arms are designed to replace the weak and rusted factory arms, providing increased strength and rigidity. Made from strong DOM steel tubing, these direct bolt-on replacements help reduce wheel hop and improve cornering, leading to better track consistency. They feature CNC machined mild steel tubing, fully TIG welded construction, greaseable polyurethane bushings, and zerk grease fittings for optimal performance.","brand":"UMI Performance","offers":[{"title":"Default Title","offer_id":52905424290086,"sku":"GPHP_4015-B","price":229.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/5697\/5654\/files\/4015-B_4d97c41f-2944-49c7-bcce-436f75218250.jpg?v=1774999316"},{"product_id":"umi-gm-rear-control-arms-tubular-poly-bushings-minimizes-wheel-hop-1","title":"UMI GM rear control arms: tubular, poly bushings, minimizes wheel hop.","description":"Rear control arms are one of the most important suspension  modifications that can be done to your GM vehicle. Stock control arms  are on the borderline of junk, bushing deflection and rusting  weak stamped material add for traction loss and poor handling ability.  Our tubular control arms are designed to give you the best of both  worlds, whether your car is a weekend cruiser or a weekend track addict  we got you covered. The included high quality polyurethane  bushings are an excellent improvement over OEM rubber bushings, while  adding ride improvements they also work excellent to reduce traction  loss. These control arms are a direct bolt-on replacement designed to  minimize wheel hop, improve cornering and help track consistency. Lower  control arms are supplied with sway bar mounting holes designed for  your stock sway bar and most aftermarket bars.  Features - Built using 1.625\" OD x 0.120\" DOM Mild Steel Tubing - CNC Machined for Precision Tolerances and Accuracy - Fully TIG and MIG Welded Construction - On-Car Grease able high quality Bushings with Grease Fittings - Durable Long Lasting Powder Coat finish  Installation: Installs in 2 hours using OEM hardware. All installation instructions included.","brand":"UMI Performance","offers":[{"title":"Default Title","offer_id":52905424945446,"sku":"GPHP_401516-B","price":369.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/5697\/5654\/files\/401516-B.jpg?v=1774999366"},{"product_id":"4024-1964-1972-gm-a-body-rear-lower-control-arms-boxed","title":"4024 - 1964-1972 GM A-Body Rear Lower Control Arms, Boxed","description":"UMI’s boxed rear lower control arms  are a bulletproof addition to your car. Suitable for street, strip or corner  carving, these arms minimize suspension deflection for a crisp handling setup  and less wheel hop. Sway bar mounting holes are reinforced with TIG welded  sleeves to allow factory style sway bar mounting, including UMI’s popular 1”  version. UMI’s boxed control arms are CNC machined for accuracy and assembled  with high quality greaseable polyurethane bushings. Features: 2” x 1-1\/2” x 1\/8” wall mild steel rectangular tubing CNC machined for accuracy and consistency MIG welded heavy duty bushing holders Greaseable polyurethane bushings with zinc plated sleeves Reinforced sway bar holes feature TIG welded reinforcement sleeves Durable and long lasting powder coat finish Made in Philipsburg, PA – USA Installation: Item installs in approximately  one hour using basic hand tools.","brand":"UMI Performance","offers":[{"title":"Default Title","offer_id":52905425207590,"sku":"GPHP_4024-B","price":329.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/5697\/5654\/files\/4024-B.jpg?v=1774999373"},{"product_id":"umi-gm-rear-control-arms-tubular-poly-bushings-reduces-wheel-hop","title":"UMI GM rear control arms: tubular, poly bushings, reduces wheel hop.","description":"Rear control arms are an essential suspension upgrade for your GM vehicle. Stock control arms often suffer from bushing deflection and rust, which can lead to traction loss and poor handling. Our tubular control arms provide a solution for both weekend cruisers and track enthusiasts. The polyurethane bushings outperform OEM rubber bushings, reducing traction loss and enhancing ride quality. These control arms are designed to minimize wheel hop, improve cornering, and ensure consistency on the track. They are compatible with both stock and aftermarket sway bars. Installation is straightforward and takes about 2 hours using the existing hardware. Detailed instructions are included.","brand":"UMI Performance","offers":[{"title":"Default Title","offer_id":52905425273126,"sku":"GPHP_401518-B","price":469.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/5697\/5654\/files\/401518-B.jpg?v=1774999381"},{"product_id":"4025-1968-1972-gm-a-body-adjustable-upper-control-arms-poly-bushings","title":"4025 - 1968-1972 GM A-Body Adjustable Upper Control Arms- Poly Bushings","description":"UMI’s adjustable rear upper control arms are a bulletproof  addition to your street car. UMI’s upper control arms are suitable for street,  strip or corner carving. The greaseable polyurethane bushings minimize  suspension deflection for a crisp handling setup, easy pinion angle tuning and  less wheel hop.  These on car adjustable  upper control arms adjust easily while staying bolted to the car and are  designed to handle many applications. These heavy duty arms feature ¼” thick  CNC laser cut mounting pads and a mix of TIG and MIG welding. These simple bolt  in replacements install in 1-2 hours and are designed to work on all rear end  housings. Features On car       adjustment using UMI designed \u0026amp; manufactured CrMo adjuster. Greaseable       polyurethane bushings with zinc plated steel sleeves. CrMo       threaded adapters for improved thread strength. CNC laser cut ¼”       upper mounting pads. Durable and long       lasting powder coat finish. Made in       Philipsburg, PA – USA. Installation: Item installs in approximately 1-2 hours using basic hand tools.","brand":"UMI Performance","offers":[{"title":"Default Title","offer_id":52905425338662,"sku":"GPHP_4025-B","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/5697\/5654\/files\/4025ab_LRG.jpg?v=1774999387"},{"product_id":"403133-1964-1972-gm-a-body-tubular-upper-lower-front-a-arm-kit","title":"403133 - 1964-1972 GM A-Body Tubular Upper \u0026 Lower Front A-Arm Kit","description":"Improve  performance and make your classic A-Body feel like a modern day muscle car with  a complete set of fabricated tubular a-arms from UMI Performance. UMI's P\/N  403133 upper and lower a-arm kit replaces the worn out, stock stamped a-arms  with high-strength tubular construction and a host of premium features. The  stock geometry lower a-arms feature tough tubular construction with  polyurethane spring isolators for ride comfort and greaseable polyurethane  bushings for precise handling and smooth suspension motion. The ball joint  mount is angled slightly from stock to permit usage with lowered vehicles and  the design offers additional wheel and tire clearance. The tubular upper a-arms  are assembled with smooth operating, low deflection UMI designed and manufactured  Delrin bushings as well as UMI-built billet CrMo cross shafts. They feature  a relocated mounting pad to increase caster without excessive shims. Both upper  and lower a-arms are jig built to maintain accuracy for a perfect fit every  time and come preloaded with premium ball joints. Critical areas are TIG welded  for superior strength and a clean look. UMI's extensive testing on the street,  drag strip and skid pad ensures a quality product able to withstand all types  of conditions. The ultra tough red or black powder coat finish guarantees your  performance parts stay beautiful on your street car, drag car, autocrosser or  Pro-Touring machine. The P\/N 403133 a-arm kit will work with factory springs,  lowering springs and coil over kits such as the popular QA1 coil over set up.  For the best handling and tire life from the UMI designed a-arms, included with  each kit are recommended alignment specs along with detailed installation  instructions. UMI Performance a-arm kit P\/N 403133 is shipped fully assembled and  ready for installation. Manufactured with pride in Philipsburg,  PA – USA. Hardware  kit, Part # 4004 -  The upper and lower a-arm hardware kit includes 1\/2\" Grade 8  bolts, washers and zinc plated nylock nuts needed to install this complete kit.  The hardware kit P\/N 4004 adds the finishing touch to your installation and  replaces the worn factory hardware with new, high quality fasteners. Features: Relocated upper ball joint mounting pad for improved caster angle \u0026amp;  better steering feel Upper a-arms assembled with UMI manufactured greaseable \u0026amp; fluted CNC machined zero deflection Delrin  bushings 4140 CrMo cross shafts, CNC machined \u0026amp; zinc plated CNC machined ball joint holders \u0026amp; tubing radiuses TIG welded DOM tubing for superior strength \u0026amp; clean looks Greaseable \u0026amp; fluted  polyurethane bushings in lower a-arms for precision handling \u0026amp; a smooth  ride Polyurethane bump stops,  polyurethane spring isolators \u0026amp; new premium ball joints installed Durable glossy red or black powder coat finish Fits factory spindle  \u0026amp; works with factory springs, lowering springs \u0026amp; coil over kits May also fit other  spindles. Call for details Package includes  recommended alignment specs \u0026amp; detailed installation instructions Simply bolt-on and go Designed  and manufactured with pride in Philipsburg, PA – USA Note: The UMI 4033 upper a-arm is designed to work with factory height or lowered cars. We do not recommend using the 4033 with cargo coils or above stock height cars, as the bump stop may contact the cross brace.","brand":"UMI Performance","offers":[{"title":"Default Title","offer_id":52905426288934,"sku":"GPHP_403133-B","price":1359.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/5697\/5654\/files\/403133-B.jpg?v=1774999451"},{"product_id":"6435-1971-1987-gm-c10-cornermax-race-lower-a-arms","title":"6435 - 1971-1987 GM C10 Cornermax Race Lower A-Arms","description":"Elevate your truck’s performance with UMI’s Race Proven lower A-arms, engineered to deliver exceptional handling, control, and responsiveness. Designed with cutting-edge features and built from premium USA-sourced materials, these A-arms are your go-to solution for superior performance on and off the track. Featuring UMI’s Race Proven #CornerMax Geometry, each arm provides optimal suspension performance and precise steering feedback, enhanced further by increased caster for improved stability and control. The double shear lower mounts are compatible with most popular 1\/2\" bearing shocks, allowing for easy upgrades and maintenance, while the innovative design enables quick spring and shock changes without disassembling ball joints. Adjustable steering stops offer customization to match your driving style, ensuring a tailored handling experience. Proudly made in Philipsburg, PA, UMI’s lower A-arms embody American craftsmanship, quality, and performance engineering—upgrade your truck today and experience the difference that true race-proven technology makes.","brand":"UMI Performance","offers":[{"title":"Default Title","offer_id":52905430221094,"sku":"GPHP_6435-R","price":999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/5697\/5654\/files\/6435-R-4.jpg?v=1774999684"},{"product_id":"3031-1982-1992-f-body-1978-1988-g-body-s10-tubular-front-lower-a-arms-poly","title":"3031 - 1982-1992 F-Body, 1978-1988 G-Body, S10 Tubular Front Lower A-Arms, Poly","description":"UMI lower A-Arms are fabricated from USA  DOM tubing with CNC notched tube ends for a precision fit. They are jig built  to maintain accuracy and bolt on correctly every time. All critical areas are  TIG welded for superior strength and a clean look. UMI’s lower A-Arms also  feature improved ball joint angle for lowered vehicles and the design provides  additional tire clearance. UMI P\/N 3031 lower a-arms include greaseable fluted  polyurethane bushings for a smooth quiet ride. They come preloaded with  polyurethane bump stops, steering stops and premium ball joints. UMI’s extensive  testing on the street, drag strip and skid pad ensures a quality product able  to with stand all types of abuse. UMI lower A-Arms are designed to work with  factory springs, lowering springs and most coil over kits without changing the  a-arms. For exceptional handling and performance we recommend combining with  UMI upper a-arms, part # 3033-2. UMI’s lower a-arms are shipped fully assembled  and ready for installation. Designed and manufactured with pride in  Philipsburg, PA - USA. Hardware kit, Part # 3011- Lower a-arm hardware kit includes 12mm Grade  10.9 bolts, washers and nylock nuts. Kit includes all hardware needed to mount the  new UMI a-arms to the vehicle. Features: 5 lbs lighter than the factory       a-arm set while increasing durability. Tubing is precision bent on a       programmable tube bender and CNC machined for accuracy. Jig built and TIG welded for       superior strength and a clean look. Greaseable and fluted polyurethane       bushings. Premium ball joints installed and       polyurethane bump stops Simply bolt-on and go. Fits       factory spindle and works with factory springs, lowering springs and coil       over kits such as Viking and QA1. Durable red or black powder coat       finish Designed and manufactured with       pride in Philipsburg, PA – USA","brand":"UMI Performance","offers":[{"title":"Default Title","offer_id":52905430843686,"sku":"GPHP_3031-B","price":729.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/5697\/5654\/files\/3031-B-1.jpg?v=1774999740"},{"product_id":"umi-rear-control-arms-improve-handling-reduce-wheel-hop-and-enhance-traction","title":"UMI rear control arms improve handling, reduce wheel hop, and enhance traction.","description":"Rear control arms are one of the most important suspension  modifications that can be done to your GM vehicle. Stock control arms  are on the borderline of junk, bushing deflection and rusting  weak stamped material add for traction loss and poor handling ability.  Our boxed control arms are designed to give you the best of both  worlds, whether your car is a weekend cruiser or a weekend track addict  we got you covered. The included high quality polyurethane  bushings are an excellent improvement over OEM rubber bushings, while  adding ride improvements they also work excellent to reduce traction  loss. These control arms are a direct bolt-on replacement designed to  minimize wheel hop, improve cornering and help track consistency. Each  control arm features the correct provisions for adding a stock or  aftermarket sway bar. Sway bar holes are reinforced with a 0.120\" wall thickness steel sleeve TIG welded and sanded into place. The  construction of the control arms features 0.120\" wall thickness  rectangular tubing with CNC machined drawn over mandrel bushing holders  and MIG welded end caps to keep out unwanted road debris.   Features - Built using 0.120\" Wall Thickness Rectangular Mild Steel Tubing - CNC Machined for Precision Tolerances and Accuracy - MIG Welded DOM Steel Bushing Holders  - Grease-able high quality Bushings with Grease Fittings - Durable Long Lasting Powder Coat finish   Installation: Installs in 1 hours using OEM hardware. All installation instructions included.","brand":"UMI Performance","offers":[{"title":"Default Title","offer_id":52905431597350,"sku":"GPHP_3615-B","price":329.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/5697\/5654\/files\/3615-B-1.jpg?v=1774999794"},{"product_id":"tubular-trailing-arms-boost-handling-reduce-flex-and-improve-stability","title":"Tubular trailing arms boost handling, reduce flex, and improve stability.","description":"Stock trailing arms work fine  for every day driving but when hard cornering and pressure is applied  they are sure to add inconsistent handling. Our tubular trailing arms  are designed to out perform the stock stamped arms by reducing flex and  decreasing bushing deflection. The added polyurethane bushings are  designed to reduce body roll and eliminate erratic handling. Built  using DOM mild steel tubing and featuring TIG welding these trailing  arms are a must for high performance applications.   Features:  - 1.250” x 0.120” DOM Mild Steel Tubing  - CNC Machined Bushing Holders  - TIG Welded Construction - Grease-able high quality Polyurethane Bushings - Brilliant Durable Powder Coat","brand":"UMI Performance","offers":[{"title":"Default Title","offer_id":52905431793958,"sku":"GPHP_3715-B","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/5697\/5654\/files\/3715a_LRG.jpg?v=1774999815"},{"product_id":"1025-1979-1998-ford-mustang-rear-lift-bars-1","title":"1025 - 1979-1998 Ford Mustang Rear Lift Bars","description":"You thought the notorious South Side Machine lift bars were done? Well, we brought them back! The UMI lift bars replace your stock control arms adding tremendous track gains while keeping your ride height the same and eliminating your quad shocks. Lift bars are designed to work with axle torque to load the chassis of the car, forcing the rear wheels downward while pushing the tires into the ground for harder launches and improved 60-foot times. These bars are designed to greatly improve traction and reduce wheel hop. Constructed of boxed mild steel tubing, 0.120\" wall and 0.250\" thick mounting plates-completely CNC machined for exact tolerances and a superb fit. Lift bars feature grease able aluminum bushing with steel sleeves. Note: Expect increased road noise, recommended for drag and race applications only. Installation:Bolt- or weld-in in approximately 2 - 2½ hours. All hardware is included. Installation:Easy bolt-on installation in about 1 hour--no drilling required. Uses OEM hardware.","brand":"UMI Performance","offers":[{"title":"Default Title","offer_id":52905442443558,"sku":"GPHP_1025-R","price":279.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/5697\/5654\/files\/1025a_LRG.jpg?v=1775000296"},{"product_id":"1036-2005-2014-ford-mustang-single-adjustable-lower-control-arms","title":"1036 - 2005-2014 Ford Mustang Single Adjustable Lower Control Arms","description":"Replace your factory control arms with UMI’s single adjustable tubular setup for a serious performance upgrade. These control arms are constructed from strong DOM tubing and feature 4140 Chrome-Moly threaded tube adapters for exceptional strength and reliability. The TIG welded construction ensures durability under demanding conditions, while the high-quality fluted polyurethane bushings provide quiet operation and smooth performance. A spherical rod end allows for precise rear-end adjustment, minimizing wheel hop, improving cornering stability, and helping to lower launch times at the track. Finished in a durable powder coat for long-lasting protection, this easy bolt-on setup installs using OEM hardware, offering a perfect blend of performance, strength, and street-friendly refinement.","brand":"UMI Performance","offers":[{"title":"Default Title","offer_id":52905442607398,"sku":"GPHP_1036-B","price":219.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/5697\/5654\/files\/1036-B.jpg?v=1775000310"},{"product_id":"1036-2005-2014-ford-mustang-single-adjustable-lower-control-arms-1","title":"1036 - 2005-2014 Ford Mustang Single Adjustable Lower Control Arms","description":"Replace your factory control arms with UMI’s single adjustable tubular setup for a serious performance upgrade. These control arms are constructed from strong DOM tubing and feature 4140 Chrome-Moly threaded tube adapters for exceptional strength and reliability. The TIG welded construction ensures durability under demanding conditions, while the high-quality fluted polyurethane bushings provide quiet operation and smooth performance. A spherical rod end allows for precise rear-end adjustment, minimizing wheel hop, improving cornering stability, and helping to lower launch times at the track. Finished in a durable powder coat for long-lasting protection, this easy bolt-on setup installs using OEM hardware, offering a perfect blend of performance, strength, and street-friendly refinement.","brand":"UMI Performance","offers":[{"title":"Default Title","offer_id":52905442705702,"sku":"GPHP_1036-R","price":219.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/5697\/5654\/files\/1036-R.jpg?v=1775000318"},{"product_id":"umi-rear-lower-control-arms-polyurethane-non-adjustable","title":"UMI rear lower control arms Polyurethane, Non-Adjustable","description":"Rear lower control arms are a necessary upgrade for any General Motors A-Body vehicle. Our control arms are designed to replace the weak and rusted factory arms, providing increased strength and rigidity. Made from strong DOM steel tubing, these direct bolt-on replacements help reduce wheel hop and improve cornering, leading to better track consistency. They feature CNC machined mild steel tubing, fully TIG welded construction, greaseable polyurethane bushings, and zerk grease fittings for optimal performance.","brand":"UMI Performance","offers":[{"title":"Default Title","offer_id":52905442902310,"sku":"GPHP_4015-R","price":229.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/5697\/5654\/files\/4015-R_3d7d5472-3690-4f06-87b1-361def44ebe5.jpg?v=1775000331"},{"product_id":"1035-2005-2014-ford-mustang-boxed-lower-control-arms","title":"1035 - 2005-2014 Ford Mustang Boxed Lower Control Arms","description":"MI’s heavy duty boxed control arms are built from oversized North American boxed steel tubing, thick wall bushing holders and the highest quality polyurethane bushings. This heavy duty set up is designed to replace the factory set-up minimizing wheel hop while helping track consistency. Aftermarket control arms eliminate flex and bushing deflection found in the factory lower control arms but replacing flexible steel with boxed construction and rubber bushings with greaseable polyurethane. This heavy duty version is built using 1-1\/4” x 2” rectangular tubing featuring a 1\/8” wall thickness, oversized bushing holders, MIG welded fabrication and finished with a gloss powdercoat. Installation: Easy one hour bolt-on installation that requires no drilling or welding and uses OEM hardware","brand":"UMI Performance","offers":[{"title":"Default Title","offer_id":52905443262758,"sku":"GPHP_1035-B","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/5697\/5654\/files\/1035-B.jpg?v=1775000345"},{"product_id":"1037cm-2005-2014-ford-mustang-double-adjustable-lower-control-arms-crmo","title":"1037CM - 2005-2014 Ford Mustang Double Adjustable Lower Control Arms - CrMo","description":"Some competitors may consider these “Race Only” control arms while we consider them Race Ready. Our double adjustable lower control arms feature 100% TIG welded fabrication using Drawn over mandrel tubing and QA1 Teflon lined rod ends, all combined to make the best control arm on the market! When you are looking for the maximal performance from your vehicle, you can't go wrong with this setup. The spherical bearing rod ends operate for a “bind” free operation when high handling is a concern by letting the suspension articulate correctly. These control arms also work excellent as a solid bushing drag race control arm with easy built in adjustment. Quick and easy on-car adjustments can be made if needed with a simple turn of the wrench. Chrome Moly- Chrome Moly version uses 1.250\" x 0.095\" 4130 Chrome Moly steel. The Chrome Moly construction adds increased strength while reducing product weight. Make your selection above. Installation: Easy one hour bolt on installation that requires no drilling or welding and uses OEM hardware. Features:- 1.250” x 0.120” DOM Tubing- 4140 Chrome Moly Threaded Tube Adaptors- QA1 ¾” Hard Chrome Plated, Teflon\/Kevlar Self Lubricating Race Rod Ends- Complete Control Arm Set Features TIG Welded Construction- CNC Machined 6061 Aluminum Step Bushings- On-Car Adjustability Using Right and Left Hand Threads- Brilliant Durable Powder Coat","brand":"UMI Performance","offers":[{"title":"Default Title","offer_id":52905444114726,"sku":"GPHP_1037CM-R","price":349.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/5697\/5654\/files\/1037-R.jpg?v=1775000352"},{"product_id":"1038-2005-2014-ford-mustang-adjustable-lower-control-arms-w-poly-bushings","title":"1038 - 2005-2014 Ford Mustang Adjustable Lower Control Arms w\/ Poly Bushings","description":"DOM mild steel tubing control arms with polyurethane bushings for ride comfort. Features on-car adjustability for additional clearance and centering aftermarket rear ends. Easy bolt-on installation with OEM hardware.","brand":"UMI Performance","offers":[{"title":"Default Title","offer_id":52905444245798,"sku":"GPHP_1038-R","price":229.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/5697\/5654\/files\/1038-R.jpg?v=1775000359"},{"product_id":"1035-2005-2014-ford-mustang-boxed-lower-control-arms-1","title":"1035 - 2005-2014 Ford Mustang Boxed Lower Control Arms","description":"MI’s heavy duty boxed control arms are built from oversized North American boxed steel tubing, thick wall bushing holders and the highest quality polyurethane bushings. This heavy duty set up is designed to replace the factory set-up minimizing wheel hop while helping track consistency. Aftermarket control arms eliminate flex and bushing deflection found in the factory lower control arms but replacing flexible steel with boxed construction and rubber bushings with greaseable polyurethane. This heavy duty version is built using 1-1\/4” x 2” rectangular tubing featuring a 1\/8” wall thickness, oversized bushing holders, MIG welded fabrication and finished with a gloss powdercoat. Installation: Easy one hour bolt-on installation that requires no drilling or welding and uses OEM hardware","brand":"UMI Performance","offers":[{"title":"Default Title","offer_id":52905444671782,"sku":"GPHP_1035-R","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/5697\/5654\/files\/1035-R.jpg?v=1775000386"},{"product_id":"103460-2005-2014-ford-mustang-rear-anti-hop-kit-budget-boxed-control-arms","title":"103460 - 2005-2014 Ford Mustang Rear Anti-Hop Kit, Budget Boxed Control Arms","description":"Wheel hop or traction issues? We have the solution! Optimize your vehicle's instant center and improve forward traction by lowering the rear of the lower control arm and adding heavy duty control arms. UMI’s anti-hop kit is designed to increase traction during launch and reduce unwanted wheel hop. Choose 2”, 2-3\/4” or 3-1\/4” drop to optimize vehicle handling and traction. UMI’s anti-hop kit installed can provide an average 0.10 second (or better) 60-foot reduction and an overall improvement in launch consistency. Anti-hop kit relocation brackets are constructed of a combination of 1\/4” and 3\/16” CNC laser cut steel plate for ultimate strength and high horsepower applications. The included box control arms are machined from 1”x 2” boxed steel tubing and feature greaseable polyurethane bushings. Anti-hop kit is designed to work on both lowered and non-lowered vehicles and feature multiple settings to optimize vehicle handling and traction. Installation: UMI P\/N 103460 is an easy 1-2 hour bolt in installationand requires no welding, drilling or cutting. All necessary hardware is included for this simple bolt on application. Kit is supplied with hardware, installation instructions. UMI Testing and Results: Throughout our testing on our 2005 and 2010 Mustang GT’s we found the S197 Mustang to be impossible to launch and extremely difficult to do a burn out without severe wheel hop. We also noticed harsh wheel hop during the first to second shift. Installing this kit can immediately remove this unwanted wheel hop. This kit installed on UMI’s 2010 Mustang GT allowed the car to launch and provided three tenths better in the 60-foot range. (Results will vary depending on power levels and modifications). Features: Anti-hop kit works with factory height or lowered vehicles. Simply bolt-in \u0026amp; launch. Multiple adjustment holes ideal to correct control arm angle on lowered vehicles while improving traction. Choose 2\", 2-3\/4\", or 3-1\/4\" drop to optimize vehicle handling and traction. Track testing shows an average of 0.10 second reduction in 60-foot times. CAD designed, CNC laser cut 3\/16\" and ¼” mild steel. Boxed control arms feature 1” x 2” steel tubing with polyurethane bushings. Easy bolt in installation with no modifications needed. New grade 10.9 hardware included. Manufactured with pride in Philipsburg, PA - USA.","brand":"UMI Performance","offers":[{"title":"Default Title","offer_id":52905446244646,"sku":"GPHP_103460-R","price":269.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/5697\/5654\/files\/103460-R.jpg?v=1775000461"},{"product_id":"103460-2005-2014-ford-mustang-rear-anti-hop-kit-budget-boxed-control-arms-1","title":"103460 - 2005-2014 Ford Mustang Rear Anti-Hop Kit, Budget Boxed Control Arms","description":"Wheel hop or traction issues? We have the solution! Optimize your vehicle's instant center and improve forward traction by lowering the rear of the lower control arm and adding heavy duty control arms. UMI’s anti-hop kit is designed to increase traction during launch and reduce unwanted wheel hop. Choose 2”, 2-3\/4” or 3-1\/4” drop to optimize vehicle handling and traction. UMI’s anti-hop kit installed can provide an average 0.10 second (or better) 60-foot reduction and an overall improvement in launch consistency. Anti-hop kit relocation brackets are constructed of a combination of 1\/4” and 3\/16” CNC laser cut steel plate for ultimate strength and high horsepower applications. The included box control arms are machined from 1”x 2” boxed steel tubing and feature greaseable polyurethane bushings. Anti-hop kit is designed to work on both lowered and non-lowered vehicles and feature multiple settings to optimize vehicle handling and traction. Installation: UMI P\/N 103460 is an easy 1-2 hour bolt in installationand requires no welding, drilling or cutting. All necessary hardware is included for this simple bolt on application. Kit is supplied with hardware, installation instructions. UMI Testing and Results: Throughout our testing on our 2005 and 2010 Mustang GT’s we found the S197 Mustang to be impossible to launch and extremely difficult to do a burn out without severe wheel hop. We also noticed harsh wheel hop during the first to second shift. Installing this kit can immediately remove this unwanted wheel hop. This kit installed on UMI’s 2010 Mustang GT allowed the car to launch and provided three tenths better in the 60-foot range. (Results will vary depending on power levels and modifications). Features: Anti-hop kit works with factory height or lowered vehicles. Simply bolt-in \u0026amp; launch. Multiple adjustment holes ideal to correct control arm angle on lowered vehicles while improving traction. Choose 2\", 2-3\/4\", or 3-1\/4\" drop to optimize vehicle handling and traction. Track testing shows an average of 0.10 second reduction in 60-foot times. CAD designed, CNC laser cut 3\/16\" and ¼” mild steel. Boxed control arms feature 1” x 2” steel tubing with polyurethane bushings. Easy bolt in installation with no modifications needed. New grade 10.9 hardware included. Manufactured with pride in Philipsburg, PA - USA.","brand":"UMI Performance","offers":[{"title":"Default Title","offer_id":52905447063846,"sku":"GPHP_103460-B","price":269.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/5697\/5654\/files\/103460-B.jpg?v=1775000510"},{"product_id":"1037-2005-2014-ford-mustang-double-adjustable-lower-control-arms","title":"1037 - 2005-2014 Ford Mustang Double Adjustable Lower Control Arms","description":"Some competitors may consider these “Race Only” control arms while we consider them Race Ready. Our double adjustable lower control arms feature 100% TIG welded fabrication using Drawn over mandrel tubing and QA1 Teflon lined rod ends, all combined to make the best control arm on the market! When you are looking for the maximal performance from your vehicle, you can't go wrong with this setup. The spherical bearing rod ends operate for a “bind” free operation when high handling is a concern by letting the suspension articulate correctly. These control arms also work excellent as a solid bushing drag race control arm with easy built in adjustment. Quick and easy on-car adjustments can be made if needed with a simple turn of the wrench. Chrome Moly- Chrome Moly version uses 1.250\" x 0.095\" 4130 Chrome Moly steel. The Chrome Moly construction adds increased strength while reducing product weight. Make your selection above. Installation: Easy one hour bolt on installation that requires no drilling or welding and uses OEM hardware. Features:- 1.250” x 0.120” DOM Tubing- 4140 Chrome Moly Threaded Tube Adaptors- QA1 ¾” Hard Chrome Plated, Teflon\/Kevlar Self Lubricating Race Rod Ends- Complete Control Arm Set Features TIG Welded Construction- CNC Machined 6061 Aluminum Step Bushings- On-Car Adjustability Using Right and Left Hand Threads- Brilliant Durable Powder Coat","brand":"UMI Performance","offers":[{"title":"Default Title","offer_id":52905447489830,"sku":"GPHP_1037-R","price":269.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/5697\/5654\/files\/1037-R_aaab26eb-3114-480c-aede-cc426baf9c51.jpg?v=1775000530"},{"product_id":"1037-2005-2014-ford-mustang-double-adjustable-lower-control-arms-1","title":"1037 - 2005-2014 Ford Mustang Double Adjustable Lower Control Arms","description":"Some competitors may consider these “Race Only” control arms while we consider them Race Ready. Our double adjustable lower control arms feature 100% TIG welded fabrication using Drawn over mandrel tubing and QA1 Teflon lined rod ends, all combined to make the best control arm on the market! When you are looking for the maximal performance from your vehicle, you can't go wrong with this setup. The spherical bearing rod ends operate for a “bind” free operation when high handling is a concern by letting the suspension articulate correctly. These control arms also work excellent as a solid bushing drag race control arm with easy built in adjustment. Quick and easy on-car adjustments can be made if needed with a simple turn of the wrench. Chrome Moly- Chrome Moly version uses 1.250\" x 0.095\" 4130 Chrome Moly steel. The Chrome Moly construction adds increased strength while reducing product weight. Make your selection above. Installation: Easy one hour bolt on installation that requires no drilling or welding and uses OEM hardware. Features:- 1.250” x 0.120” DOM Tubing- 4140 Chrome Moly Threaded Tube Adaptors- QA1 ¾” Hard Chrome Plated, Teflon\/Kevlar Self Lubricating Race Rod Ends- Complete Control Arm Set Features TIG Welded Construction- CNC Machined 6061 Aluminum Step Bushings- On-Car Adjustability Using Right and Left Hand Threads- Brilliant Durable Powder Coat","brand":"UMI Performance","offers":[{"title":"Default Title","offer_id":52905447620902,"sku":"GPHP_1037-B","price":269.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/5697\/5654\/files\/1037-B.jpg?v=1775000544"},{"product_id":"1037cm-2005-2014-ford-mustang-double-adjustable-lower-control-arms-crmo-1","title":"1037CM - 2005-2014 Ford Mustang Double Adjustable Lower Control Arms - CrMo","description":"Some competitors may consider these “Race Only” control arms while we consider them Race Ready. Our double adjustable lower control arms feature 100% TIG welded fabrication using Drawn over mandrel tubing and QA1 Teflon lined rod ends, all combined to make the best control arm on the market! When you are looking for the maximal performance from your vehicle, you can't go wrong with this setup. The spherical bearing rod ends operate for a “bind” free operation when high handling is a concern by letting the suspension articulate correctly. These control arms also work excellent as a solid bushing drag race control arm with easy built in adjustment. Quick and easy on-car adjustments can be made if needed with a simple turn of the wrench. Chrome Moly- Chrome Moly version uses 1.250\" x 0.095\" 4130 Chrome Moly steel. The Chrome Moly construction adds increased strength while reducing product weight. Make your selection above. Installation: Easy one hour bolt on installation that requires no drilling or welding and uses OEM hardware. Features:- 1.250” x 0.120” DOM Tubing- 4140 Chrome Moly Threaded Tube Adaptors- QA1 ¾” Hard Chrome Plated, Teflon\/Kevlar Self Lubricating Race Rod Ends- Complete Control Arm Set Features TIG Welded Construction- CNC Machined 6061 Aluminum Step Bushings- On-Car Adjustability Using Right and Left Hand Threads- Brilliant Durable Powder Coat","brand":"UMI Performance","offers":[{"title":"Default Title","offer_id":52905447915814,"sku":"GPHP_1037CM-B","price":349.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/5697\/5654\/files\/1037-B_29573e8c-778f-4929-8fdb-f5b8e7bd2abb.jpg?v=1775000571"},{"product_id":"1038-2005-2014-ford-mustang-adjustable-lower-control-arms-w-poly-bushings-1","title":"1038 - 2005-2014 Ford Mustang Adjustable Lower Control Arms w\/ Poly Bushings","description":"DOM mild steel tubing control arms with polyurethane bushings for ride comfort. Features on-car adjustability for additional clearance and centering aftermarket rear ends. Easy bolt-on installation with OEM hardware.","brand":"UMI Performance","offers":[{"title":"Default Title","offer_id":52905448997158,"sku":"GPHP_1038-B","price":229.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/5697\/5654\/files\/1038-B.jpg?v=1775000639"},{"product_id":"upgraded-rear-control-arm-boosts-traction-stability-and-launch-control","title":"Upgraded rear control arm boosts traction, stability, and launch control.","description":"his upper rear control arm replaces the factory stamped upper control arm reducing wheel hop and increasing traction. The S197 Mustang chassis uses a 3-link rear suspension system with a panhard bar to control the rear end under the vehicle. Under hard loads the factory pieces tend to flex and rubber bushings deflect leading to poor traction and erratic handling. Replacing the factory pieces with stronger well designed items eliminates this flex allowing for better control of the vehicle and improved traction during launches. This upper control arm is a direct bolt-on replacement which features greaseable high quality polyurethane bushings and on car adjustment. Quick and easy on-car adjustments can be made when needed with a simple turn of the wrench, there is no need to remove the control arm from the vehicle. Adjustment of the upper control arm allows pinion angle changes for suspension set-up and suspension correction when a vehicle has been lowered.","brand":"UMI Performance","offers":[{"title":"Default Title","offer_id":52905449390374,"sku":"GPHP_1048-B","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/5697\/5654\/files\/1048-B.jpg?v=1775000652"},{"product_id":"umi-single-adjustable-control-arms-poly-rod-end-combo-dom-steel","title":"UMI single adjustable control arms: poly\/rod end combo, DOM steel.","description":"UMI Performance's single adjustable lower control arms combine an polyurethane bushing on one end with a QA1 spherical rod end on the other. This design allows for rear-end adjustment and minimizes bind, enhancing handling in high-performance situations. Suitable for drag racing, autocross, and street driving, these control arms offer quiet operation thanks to the polyurethane bushings and adjustable length via the QA1 rod end. Constructed from durable 1.500\" x 0.120\" DOM Mild Steel Tubing with TIG welding, these control arms support both stock and aftermarket sway bars through reinforced holes. Installation is straightforward using OEM hardware, with instructions included for convenience.","brand":"UMI Performance","offers":[{"title":"Default Title","offer_id":52905449521446,"sku":"GPHP_4014-B","price":279.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/5697\/5654\/files\/4014-B.jpg?v=1775000665"},{"product_id":"umi-on-car-control-arms-with-roto-joint-tech-for-performance-quiet-ride","title":"UMI on-car control arms with Roto-Joint tech for performance \u0026 quiet ride.","description":"UMI's on car adjustable lower control arms utilize our Roto-Joint technology for a bind free performance, quiet ride quality, and also offer on car adjustment. The control arms can be adjusted longer or shorter moving the rear end back or forward to squeeze those larger tires in the fender wells. Adjustable control arms are also recommended for most aftermarket rear end installs to center the rear end and prevent tire rubbing. The installed Roto-Joint is a pivot ball lined with a greaseable delrin race designed to offer 28 degrees of total unrestricted movement, more than adequate for a bind free, low friction operation. The Roto-Joint design improves performance over the factory rubber and aftermarket polyurethane bushings by allowing the suspension to articulate correctly, and provide precision handling. This control arm set features polyurethane bushings on one end and UMI’s spherical Roto-Joint on the other end. This set-up is designed for street performance and street enthusiast. The polyurethane bushing end is designed to be bolted to the vehicle chassis side while the Roto-Joint attaches to the rear end side. Since the polyurethane bushings are softer they are designed to absorb more road noise and shock before it enters the passenger compartment of the vehicle. All bushing ends and Roto-Joints are greaseable and low maintenance making an excellent street setup for your cruiser!","brand":"UMI Performance","offers":[{"title":"Default Title","offer_id":52905449685286,"sku":"GPHP_1061-B","price":269.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/5697\/5654\/files\/1061ab_LRG.jpg?v=1775000671"},{"product_id":"roto-joint-control-arm-upgrade-with-steel-tubing-spacer-kit","title":"Roto-Joint control arm upgrade with steel tubing \u0026 spacer kit.","description":"Upgrade to a rear upper control arm with a spherical Roto-Joint for improved traction and handling. This direct bolt-on replacement features on-car adjustability and is constructed with 1.250” x 0.120” DOM mild steel tubing. Includes a spacer kit for fixing oversized holes in the factory mount.","brand":"UMI Performance","offers":[{"title":"Default Title","offer_id":52905449914662,"sku":"GPHP_1062-B","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/5697\/5654\/files\/1062-B.jpg?v=1775000680"},{"product_id":"roto-joint-control-arm-upgrade-with-steel-tubing-spacer-kit-1","title":"Roto-Joint control arm upgrade with steel tubing \u0026 spacer kit.","description":"Upgrade to a rear upper control arm with a spherical Roto-Joint for improved traction and handling. This direct bolt-on replacement features on-car adjustability and is constructed with 1.250” x 0.120” DOM mild steel tubing. Includes a spacer kit for fixing oversized holes in the factory mount.","brand":"UMI Performance","offers":[{"title":"Default Title","offer_id":52905450176806,"sku":"GPHP_1062-R","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/5697\/5654\/files\/1062-R.jpg?v=1775000687"},{"product_id":"umi-adjustable-upper-control-arm-boosts-traction-and-cuts-wheel-hop","title":"UMI adjustable upper control arm boosts traction and cuts wheel hop","description":"Harness the power of your new Ford Mustang with a UMI Performance P\/N 1066 adjustable rear upper control arm. Upgrade from the flimsy, factory rubber bushing setup to improve responsiveness and reduce wheel hop upon launching. The robust bracket is constructed from CNC machined 0.250” thick mild steel and reinforced with three-hole gussets for incredible strength. The 4140 CrMo adjustment boss and hex adjuster is built in-house so we can control the quality. Premium rod ends allow for smooth articulation without the binding associated with the factory rubber bushings. The P\/N 1066, with its on-car adjustability, allows you to easily set pinion angle for drag racing applications or correct pinion angle to compensate for vehicle lowering. The beautiful red or black powder coated P\/N 1066 uses factory hardware which allows you to bolt them on and go. Proudly designed and fabricated in Philipsburg, PA – USA.","brand":"UMI Performance","offers":[{"title":"Default Title","offer_id":52905451815206,"sku":"GPHP_1066-R","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/5697\/5654\/files\/1066-R.jpg?v=1775000700"},{"product_id":"1057-2005-2014-mustang-lower-control-arms-poly-roto-joint-combination","title":"1057 - 2005-2014 Mustang Lower Control Arms- Poly\/Roto-Joint Combination","description":"UMI's tubular lower control arms for the 2005 and up Ford Mustang utilize our Roto-Joint technology for a bind free performance and quiet comfortable ride quality. The Roto-Joint design is a pivot ball lined with a greaseable delrin race designed to offer 28 degrees of total unrestricted movement, more than adequate for a bind free, low friction operation. The Roto-Joint design improves performance over the factory rubber and aftermarket polyurethane bushings by allowing the suspension to articulate correctly, and provide precision handling. The installed UMI Roto-Joint allows rear end free movement when high handling, auto cross or road race is a concern while still being a 100% streetable setup. The installed delrin race, which lines the spherical ball, absorbs shock and road noise for a quiet and smooth operation on any street or track driven vehicle. This control arm set features polyurethane bushings on one end and UMI’s swivel Roto-Joint on the other end. This set-up is designed for street performance and street enthusiast. The polyurethane bushing end is designed to be bolted to the vehicle chassis side while the Roto-Joint attaches to the rear end side. Since the polyurethane bushings are softer they are designed to absorb more road noise and shock before it enters the passenger compartment of the vehicle. All bushing ends and Roto-Joints are greaseable and low maintenance making an excellent street setup for your cruiser!","brand":"UMI Performance","offers":[{"title":"Default Title","offer_id":52905452208422,"sku":"GPHP_1057-B","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/5697\/5654\/files\/1057-B.jpg?v=1775000714"},{"product_id":"401417-1968-1972-gm-a-body-adjustable-upper-lower-control-arm-kit","title":"401417 - 1968-1972 GM A-Body Adjustable Upper \u0026 Lower Control Arm Kit","description":"This kit includes (1) set of our tubular single adjustable lower  control arms and (1) set of our on-car adjustable upper control arms,  \"Ultimate Arms\". Both items are direct replacements of the OEM set up  adding strength, ride improvement and most importantly, rear end  adjustment. For more information please click on each items link below.   Kit Includes:  1 Set- Tubular Lower Control Arms- Item # 4014 1 Set- Adjustable Upper Control Arms- Item # 4017","brand":"UMI Performance","offers":[{"title":"Default Title","offer_id":52905452306726,"sku":"GPHP_401417-R","price":519.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/5697\/5654\/files\/401417-R.jpg?v=1775000721"},{"product_id":"upgraded-rear-control-arm-boosts-traction-stability-and-launch-control-1","title":"Upgraded rear control arm boosts traction, stability, and launch control.","description":"This new upper rear control arm replaces the factory stamped control arm reducing wheel hop and increasing traction. The S197 Mustang chassis uses a 3-link rear suspension system with a panhard bar to control the rear end under the vehicle. Under hard loads the factory pieces tend to flex and rubber bushings deflect leading to poor traction and erratic handling. Replacing the factory pieces with stronger well designed items eliminates this flex allowing for better control of the vehicle and improved traction during launches. This upper control arm is a direct bolt-on replacement and features high quality grease-able polyurethane bushings.","brand":"UMI Performance","offers":[{"title":"Default Title","offer_id":52905452372262,"sku":"GPHP_1046-B","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/5697\/5654\/files\/1046ab_LRG.jpg?v=1775000727"},{"product_id":"1057-2005-2014-mustang-lower-control-arms-poly-roto-joint-combination-1","title":"1057 - 2005-2014 Mustang Lower Control Arms- Poly\/Roto-Joint Combination","description":"UMI's tubular lower control arms for the 2005 and up Ford Mustang utilize our Roto-Joint technology for a bind free performance and quiet comfortable ride quality. The Roto-Joint design is a pivot ball lined with a greaseable delrin race designed to offer 28 degrees of total unrestricted movement, more than adequate for a bind free, low friction operation. The Roto-Joint design improves performance over the factory rubber and aftermarket polyurethane bushings by allowing the suspension to articulate correctly, and provide precision handling. The installed UMI Roto-Joint allows rear end free movement when high handling, auto cross or road race is a concern while still being a 100% streetable setup. The installed delrin race, which lines the spherical ball, absorbs shock and road noise for a quiet and smooth operation on any street or track driven vehicle. This control arm set features polyurethane bushings on one end and UMI’s swivel Roto-Joint on the other end. This set-up is designed for street performance and street enthusiast. The polyurethane bushing end is designed to be bolted to the vehicle chassis side while the Roto-Joint attaches to the rear end side. Since the polyurethane bushings are softer they are designed to absorb more road noise and shock before it enters the passenger compartment of the vehicle. All bushing ends and Roto-Joints are greaseable and low maintenance making an excellent street setup for your cruiser!","brand":"UMI Performance","offers":[{"title":"Default Title","offer_id":52905452437798,"sku":"GPHP_1057-R","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/5697\/5654\/files\/1057-R.jpg?v=1775000734"},{"product_id":"upgraded-rear-control-arm-boosts-traction-stability-and-launch-control-2","title":"Upgraded rear control arm boosts traction, stability, and launch control.","description":"This new upper rear control arm replaces the factory stamped control arm reducing wheel hop and increasing traction. The S197 Mustang chassis uses a 3-link rear suspension system with a panhard bar to control the rear end under the vehicle. Under hard loads the factory pieces tend to flex and rubber bushings deflect leading to poor traction and erratic handling. Replacing the factory pieces with stronger well designed items eliminates this flex allowing for better control of the vehicle and improved traction during launches.","brand":"UMI Performance","offers":[{"title":"Default Title","offer_id":52905452503334,"sku":"GPHP_1047-B","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/5697\/5654\/files\/1047-B.jpg?v=1775000741"},{"product_id":"401419-1964-1967-gm-a-body-adjustable-upper-lower-control-arm-kit","title":"401419 - 1964-1967 GM A-Body Adjustable Upper \u0026 Lower Control Arm Kit","description":"This kit includes (1) set of our tubular single  adjustable lower control arms and (1) set of our on-car adjustable  upper control arms, \"Ultimate Arms\". Both items are direct replacements  of the OEM set up adding strength, ride improvement and most  importantly, rear end adjustment. For more information please click on  each items link below.   Kit Includes:    1 Set- Tubular Lower Control Arms- Item # 4014   1 Set- Adjustable Upper Control Arms- Item # 4019   Installation:   Complete kit includes detailed installation instructions, uses OEM hardware.","brand":"UMI Performance","offers":[{"title":"Default Title","offer_id":52905452667174,"sku":"GPHP_401419-R","price":519.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/5697\/5654\/files\/401419-R.jpg?v=1775000755"},{"product_id":"401517-1968-1972-gm-a-body-lower-control-arm-adj-upper-control-arm-kit","title":"401517 - 1968-1972 GM A-Body Lower Control Arm \u0026 Adj Upper Control Arm Kit","description":"This kit includes (1) set of our tubular lower control arms and (1) set  of our on-car adjustable upper control arms, \"Ultimate Arms\". Both  items are direct replacements of the OEM set up adding strength, ride  improvement and most importantly, rear end adjustment.   Kit Includes:   1 Set- Tubular Lower Control Arms- Item # 4015 1 Set- Adjustable Upper Control Arms- Item # 4017   Installation: Complete kit includes detailed installation instructions, uses OEM hardware.","brand":"UMI Performance","offers":[{"title":"Default Title","offer_id":52905453617446,"sku":"GPHP_401517-R","price":469.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/5697\/5654\/files\/401517-R.jpg?v=1775000769"},{"product_id":"upgraded-rear-control-arm-boosts-traction-stability-and-launch-control-3","title":"Upgraded rear control arm boosts traction, stability, and launch control.","description":"This new upper rear control arm replaces the factory stamped control arm reducing wheel hop and increasing traction. The S197 Mustang chassis uses a 3-link rear suspension system with a panhard bar to control the rear end under the vehicle. Under hard loads the factory pieces tend to flex and rubber bushings deflect leading to poor traction and erratic handling. Replacing the factory pieces with stronger well designed items eliminates this flex allowing for better control of the vehicle and improved traction during launches. This upper control arm is a direct bolt-on replacement and features high quality grease-able polyurethane bushings.","brand":"UMI Performance","offers":[{"title":"Default Title","offer_id":52905454207270,"sku":"GPHP_1046-R","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/5697\/5654\/files\/1046a_LRG.jpg?v=1775000803"},{"product_id":"umi-adjustable-upper-control-arm-boosts-traction-and-cuts-wheel-hop-1","title":"UMI adjustable upper control arm boosts traction and cuts wheel hop.","description":"Harness the power of your Ford Mustang with UMI Performance's adjustable rear upper control arm. Upgrade from the factory rubber bushings to improve responsiveness and reduce wheel hop. Constructed with CNC machined 0.250” thick mild steel bracket and 4140 chromoly adjustment boss.","brand":"UMI Performance","offers":[{"title":"Default Title","offer_id":52905454272806,"sku":"GPHP_1066-B","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/5697\/5654\/files\/1066ab_LRG.jpg?v=1775000810"},{"product_id":"401419-1964-1967-gm-a-body-adjustable-upper-lower-control-arm-kit-1","title":"401419 - 1964-1967 GM A-Body Adjustable Upper \u0026 Lower Control Arm Kit","description":"This kit includes (1) set of our tubular single  adjustable lower control arms and (1) set of our on-car adjustable  upper control arms, \"Ultimate Arms\". Both items are direct replacements  of the OEM set up adding strength, ride improvement and most  importantly, rear end adjustment. For more information please click on  each items link below.   Kit Includes:    1 Set- Tubular Lower Control Arms- Item # 4014   1 Set- Adjustable Upper Control Arms- Item # 4019   Installation:   Complete kit includes detailed installation instructions, uses OEM hardware.","brand":"UMI Performance","offers":[{"title":"Default Title","offer_id":52905454338342,"sku":"GPHP_401419-B","price":519.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/5697\/5654\/files\/401419-B.jpg?v=1775000817"}],"url":"https:\/\/ossparts.com\/collections\/suspension-control-arm.oembed?page=15","provider":"Operational Speed Supply","version":"1.0","type":"link"}